Aquentis SZP

The SZP is a Single Zone Liquid Leak Detection Panel providing both audible and visual indication of an alarm condition. The easy to understand icons provide simple recognition of the systems status at all times.

Designed for use within small technical areas such as computer/equipment rooms, the panel can be connected to either sensing cables or probes, or a combination of both. The connected sensing circuit is monitored for continuity (cable break) and leaks continuously.

The system operates on either 230v AC or 24v DC and is enclosed within an IP54 rated enclosure with a separate cable termination bay to facilitate cable connections.

The unit is capable of supplying a 24v DC output for powered detectors such as float switches and Hydrocarbon detectors.

Product Currently in Development

The 2+2 is an innovative 2 Zone panel which has been designed for both cost effectiveness and ease of use but forgoing none of the features of a fully functional system. The unit is enclosed within a white powder coated case with hinged door allowing easy access to the connection terminals and stand-by battery.

The unit incorporates a four line LCD display to provide detailed system status of panel functions and the sensing devices connected, along with four LED status indicators for Power, Alarm, Leak & Fault.

Both zones are provided with independent SPCO relays for connection to supervisor equipment or BMS. A common fault relay is also available within the unit.

WDP Water Detection Probe

The WDP Water Detection probe with its unique design facilitates either horizontal or vertical mounting from just one unit. Its low profile means that it has a high level of stability and can be sited below sensitive equipment, valves and pipe joints. The unit's high-visibility yellow colour makes it easily recognisable in low light conditions, and the heavy-duty aluminium guard plate provides physical protection where the unit is installed within harsh environments.

The probe's height can be adjusted within the housing, to accommodate installation in conductive drip trays or to eliminate alarms caused by acceptable small amounts of water.

The probe can be used on a number of other manufacturers panels as a replacement or system enhancement (please check for compatibility).

DCP Dual Containment Water Detection Probe

The DCP Dual Containment water detection probe has been designed for integration within a dual pipe containment system. The probe features a 1/2" BSP male thread for direct coupling into either a female flange or socket. The unit comes as standard with two insulated 300mm long stainless steel probes that can be cut onsite to the required length. The probe is fully sealed and is capable of full submersion without damage to the unit.

Water Detection Module

Application
Primarily designed for small area water detection in locations such as Tea Points, Kitchens, Bunded area's and Drip Trays, or alternatively these units can be used with the Aquentis RS-1 Rain Sensor. Because of their compact size these modules can normally be easily incorporated into OEM equipment or outstation enclosures thus saving the cost of a dedicated enclosure. Modules can be sited close to the area to be monitored or mounted up to 200 Metres away in control equipment.

Rain Detector

A totally weatherproof and self contained rain detection unit which is used to signal when rain hail or sleet is falling. Primarily used by the BMS industry to signal when skylights should be closed these units feature a heated detection comb to prevent the unit activating in frosty conditions or when Dew is forming.

Condensation Detector

A totally self contained condensation detector designed to warn of the onset of condensation on a Chilled Beam air-conditioning system and thus preventing “indoor rain” damaging equipment and furnishings. One detector is needed for each point where cold water enters a ceiling so a large building may have several hundred condensation detectors.

Liquid Detection System

The Water Alarm is a totally self contained detection device which can be used in a variety of situations. The main unit houses all of the detection circuitry along with the batteries which allow it to be placed just about anywhere without the need for a mains voltage power supply. It comes supplied with a three metre length of special sensor cable, which detects any water which comes into contact with it.